Question 1

What is lost converting OBJ to 3MF?

Accepted Answer

For this pair there is no real loss: 3MF can represent everything OBJ stores. OBJ holds geometry, UVs and normals (materials live in a separate MTL file) and 3MF holds geometry with units, colors, materials and metadata, so the information travels across complete. The geometry survives intact — every triangle and every coordinate, in the same units — because the ilove3d converter copies the mesh without rescaling or recentring it, unlike many online converters that normalise the model on load and hand back different measurements without saying so. The only thing that changes is the container: the same model packaged differently, with a different size on disk and different compatibility. If the pair did involve any loss, the tool would tell you explicitly before you downloaded anything, with the detail of exactly what gets left out along the way. In practice this pair is safe to run at any point in your workflow, since nothing degrades along the way.

Question 2

Are my files uploaded to a server?

Accepted Answer

No. Converting OBJ to 3MF happens entirely in your browser: the file opens as a local blob, it is processed on your own machine, and the result downloads without anything leaving your computer. There is no upload, no intermediate server and no temporary storage for anyone to purge afterwards. Open your browser network panel while converting and you will not see a single outgoing request carrying your model. That matters when the file sits under a non-disclosure agreement, when it is your own unpublished design, or when it is a medical scan. It also has a practical consequence: there is no size limit imposed by a server, and the ceiling is your own machine memory instead. And once the page has loaded, the converter keeps working even with no connection at all. None of this depends on trusting us, either: it is verifiable from your own browser in a few seconds, which is a different kind of guarantee from a privacy policy.

Question 3

Does converting change the size of the model?

Accepted Answer

No. Unlike a good share of online converters, the ilove3d converter does not rescale, recentre or rotate anything: the coordinates of your OBJ are copied straight across into the 3MF. If your part measured 47.3 mm tall before converting, it measures exactly that afterwards, and it keeps its position relative to the origin, which is what matters when the model belongs to an assembly and has to line up with other pieces. Many converters normalise the mesh on load — centring it and scaling it to a standard size — because it previews neatly that way, and they hand you back a file with changed measurements without mentioning it. That does not happen here. The only tool on the site that moves or scales geometry is transform, and you have to ask it explicitly.

Question 4

What programs open a 3MF file?

Accepted Answer

3MF is STL's modern successor for 3D printing: meshes with units, colors and print metadata, and it is normally used in modern 3D printing (PrusaSlicer, Bambu Studio, Windows 3D). That is the main reason to convert into this format: getting the model into the program or the platform where you actually intend to use it. Before converting it is worth confirming that the destination accepts 3MF, because not every program supports every format and the installed version often matters more than the name of the software. If the file is headed for a website or a browser viewer, GLB is usually the safest bet; if it goes to a slicer for printing, STL remains the standard that opens everywhere; and if it is bound for augmented reality on an iPhone, USDZ is the only one Quick Look recognises natively. The ilove3d converter covers all five output formats with nothing to install.

Convert OBJ to 3MF

OBJ → 3MF: what you should know