No file handy?

1. Review your model

Mesh status
Triangles
Open edges
Non-manifold edges

Current dimensions:

Checks edges and connectivity, not minimum wall thickness, intersections or supports. Review sliced layers before printing.

2. Choose changes

3. Check build volume

Uses X × Y × Z and assumes model units are millimeters. Does not include brim or support clearance. STL and 3MF export geometry without textures or a printer profile.

Prepare your model for printing

Load a model, check its mesh and dimensions, choose corrections and download STL or 3MF. One continuous workflow.

What this tool does

  • Inspect open edges, non-manifold edges, triangles and dimensions before and after processing.
  • Optional repair, simplification and proportional scaling on a copy. Small fragments are preserved.
  • Compare dimensions with your printer volume in the current orientation.
  • Export STL or 3MF geometry in millimeters, without textures or printer profiles.

How it works

  1. 01

    Inspect the model

    Load a file or try the sample and check its mesh and dimensions.

  2. 02

    Choose changes

    Enable repair, simplification or scaling and enter your printer build volume.

  3. 03

    Prepare and download

    Review the result and download it for your slicer.

Analytics

I measure which tools get used and which ones fail, so I can fix them. Your files never leave your device.

If you decline, everything still works. If you answer a question, I only keep your answer. What I measure