Turn an image into a colorful 3D bookmark. Adjust the crop, choose your filaments and download the design with its print plan.
Photos with a clear subject, illustrations and logos work best. The image becomes printable color regions.
JPG · PNG · WebP · 25 MBLoad a JPG, PNG or WebP. The crop fills the bookmark without stretching the image. Move, rotate and zoom to frame the subject.
Choose the color count and assign your filament colors. Adjust width, height, corners, tassel hole and band thickness.
The ZIP contains your model and a file listing swap heights. Use 0.2 mm layers to follow the plan and verify the swaps in your slicer.
Not necessarily. Bands occupy different heights, so you can insert pauses and change filament manually. With a multi-filament printer, you still need to assign the filaments and check the sliced preview.
No. It uses standard 3MF: geometry is stored by band with material colors. It contains no printer profile or Bambu/Orca-specific setup. The height plan helps you configure your slicer.
The photo is simplified into color regions, with detail approximated on a 0.4–0.8 mm grid. Opaque filament gives more control; translucency and underlying colors can affect the result.
No. Cropping, color reduction and model generation run in your browser. The download contains your model and plan without uploading the image.